Auburndale Cabinet Refacing
Cabinet Refacing in Auburndale, FL
Cabinet refacing in Auburndale, FL. New doors, drawer fronts, and finishes over sound boxes. Free estimates.
Serving Auburndale and nearby communities.
Get a free estimate
Tell us about the project and how to reach you.
Cabinet Refacing
Cabinet Refacing near me: homes and businesses in Auburndale
Cabinet refacing means keeping your existing cabinet boxes and replacing what shows: doors, drawer fronts, and exposed end panels. It's the move for homeowners whose boxes are solid but whose doors look dated, chipped, or worn out.
Auburndale sits in the Lakeland-Winter Haven metro, and that humid Central Florida air is hard on cabinets. Particleboard boxes swell at the seams, and thermofoil edges lift and peel faster than they would up north. Auburndale Cabinet Refacing sees both ends of it here: older builder-grade kitchens with original boxes still sound underneath, and newer construction already showing early wear on factory finishes. Either way, refacing usually solves it without a gut remodel.
What we do
Cabinet Refacing services
Cabinet Refacing across Auburndale and the surrounding area.
Residential Services
Cabinet Refacing
Cabinet Refacing in Auburndale, FL covers new doors, veneer boxes, and matched end panels, with free estimates and written scope.
Learn more →
Kitchen Cabinet Refacing
Kitchen cabinet refacing in Auburndale, FL. New doors, boxes, and finishes around your existing layout. Free estimates.
Learn more →
Bathroom Vanity Refacing
Bathroom Vanity Refacing in Auburndale, FL updates moisture-resistant doors and panels, with free estimates and quick turnaround.
Learn more →
Cabinet Door Replacement
Cabinet Door Replacement in Auburndale, FL swaps dated doors for new fronts and hinges, with free estimates and fast turnaround.
Learn more →
Cabinet Refinishing & Painting
Cabinet Refinishing & Painting in Auburndale, FL sprays durable conversion finishes built for humidity, with free estimates.
Learn more →
Custom Cabinet Doors
Custom Cabinet Doors in Auburndale, FL fit non-standard openings in older homes, with free estimates and precise fabrication.
Learn more →
Kitchen Island Refacing
Kitchen Island Refacing in Auburndale, FL updates island panels and doors to match or accent your kitchen, with free estimates.
Learn more →
Thermofoil & Laminate Peeling Repair
Thermofoil and laminate peeling repair in Auburndale, FL. Fix bubbling edges and swollen boxes from Florida humidity. Free estimates.
Learn more →
Looking for something else? Browse all services in the menu, or tell us about a custom project.
Why choose us
Why choose Auburndale Cabinet Refacing
Box inspection before we quote
We check every cabinet box in person so the estimate reflects what's actually there, not a guess over the phone.
Materials picked for Central Florida humidity
Sealed laminate edges and moisture-rated thermofoil hold up where standard products lift and bubble.
Written estimates, no surprise add-ons
You get a scope and a number before work starts. Changes get discussed, not slipped in.
Clean installs with matched end panels
New doors and boxes are color-matched so the finished kitchen looks built, not patched.
Have a project in mind?
Get a Free EstimateHow it works
How our Cabinet Refacing process works
Step 1Initial Consultation
A specialist visits to assess existing cabinetry and discuss style goals.
Step 2Measurement & Design
Precise measurements are taken to plan door sizes, finishes, and layout adjustments.
Step 3Material Selection
Homeowners choose from veneers, finishes, and hardware samples for their project.
Step 4Surface Preparation
Existing boxes are cleaned, sanded, and repaired to ensure a smooth refacing surface.
Step 5Refacing Installation
New veneers, doors, and panels are applied and fitted to the existing cabinet frames.
Step 6Final Walkthrough
A final inspection confirms alignment, finish quality, and functioning hardware before project closeout.
Ready to start?
Get a Free EstimateCost
Cabinet Refacing auburndale cost
Pricing depends on how much surface you're replacing and what material grade you pick. These are ballpark ranges, not a quote. Call for a free estimate based on your actual kitchen. Call (941) 740-6265 for a walkthrough and written number.
| Project type | Typical range | What’s included |
|---|---|---|
| Door-only swap | $1,800–$4,500 | new doors and drawer fronts on existing boxes, basic hardware. |
| Single vanity refacing | $1,200–$3,000 | door/drawer fronts, side panels, hardware. |
| Average kitchen reface | $4,500–$9,500 | full box veneer, new doors, matched end panels. |
| Larger kitchen with island | $8,000–$14,000 | full kitchen plus island panels and accent work. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateMaterials
Door and finish materials we use
Material choice matters more here than in a drier climate. We pick products that hold up against swelling boxes and peeling edges.
Wood Veneer Sheets
Thin wood veneers go over existing boxes for a natural grain look that resists the flat, plasticky feel of old laminate.
Laminate Finishes
Durable laminate gives an easy-clean surface that holds up against daily kitchen humidity and grease.
Solid Wood Doors
New solid wood doors swap in for warped or cracked originals, holding their shape better than particleboard fronts.
Cabinet Hardware
Pulls, knobs, and hinges matched to the new door style, finished in corrosion-resistant coatings.
Soft-Close Hinges
Quiet, controlled closing that also takes pressure off the door frame over time.
Protective Topcoat
A clear sealant layer on exposed edges, the part that usually fails first when thermofoil starts to lift in humidity.
Questions on materials?
Get a Free EstimateTimeline
How Long Refacing Takes
A refacing project moves in days, not the weeks a full remodel takes. Here's roughly how it breaks down. Your kitchen stays mostly usable until install day. That's the real advantage over tearing everything out.
- 01
Consult
same day - 02
Door and material fabrication
1–2 weeks - 03
Box prep and veneer
1–2 days - 04
Install
2–4 days
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits, codes, and compliance
Refacing is cosmetic work in almost every case. Here's the general split, but always confirm with your local building department before you start.
| Typically needs a permit | Often no permit |
|---|---|
| Moving or removing a wall to change the kitchen layout | Replacing doors and drawer fronts on existing boxes |
| Relocating plumbing lines for a new sink or island | Applying new veneer or laminate to cabinet surfaces |
| Rewiring electrical for new outlets or lighting during a reconfiguration | Installing new hardware or soft-close hinges |
| — | Adding crown molding to finish cabinet tops |
| — | Refinishing or repainting existing doors |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a Cabinet Refacing pro
| DIY | Hire a pro |
|---|---|
| Swapping knobs and pulls for a quick style update | Veneer and laminate adhesion on boxes exposed to humidity swings, where a weak bond shows up as lifted edges within a season |
| Cleaning and minor touch-up on scuffed finishes | Box prep that needs sanding and repair before new material goes on |
| Tightening loose hinges | Color-matching new doors to existing boxes so the kitchen doesn't look patched |
| — | Full box resurfacing where precision cuts and clean seams matter |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for Cabinet Refacing
Call (941) 740-6265 for a free estimate.
- Thermofoil edges are lifting, bubbling, or peeling near the sink or dishwasher
- Doors look dated or damaged but the boxes still feel solid when you knock on them
- Drawers slam shut or hinges sag and won't hold position
- You're planning to sell and want updated kitchen finishes without a full remodel
Seeing warning signs?
Get a Free EstimateWhere we work
Serving Auburndale and nearby communities
Local pages for these communities. Nearby towns without a page are still in our service area.
Also serving
Inwood · Jan Phyl Village · Combee Settlement · Winter Haven · Crystal Lake · Lakeland · Haines City · and others
Outside these locations?
Before & after
See the work up close
Before 
After
Customer feedback
What local customers say
Margaret S.
2 days ago
5 out of 5 starsCalled Auburndale Cabinet Refacing after a neighbor tip in Auburndale. Super easy to deal with — clear answers, no runaround, and they actually cared about the details on our cabinet door replacement.
Auburndale, FL
David B.
1 week ago
5 out of 5 starsPrice was way more affordable than the other quotes we got for countertop pairing services. Still felt premium — clean jobsite, solid finish, and I'd hire them again without thinking twice.
Lake Ariana, FL
Nancy W.
4 weeks ago
5 out of 5 starsHonestly did not expect such a professional team. They showed up on time, explained every step, and the cabinet refacing turned out better than I pictured.
Berkley, FL
Common questions
Cabinet Refacing FAQs
What are the steps involved in cabinet refacing?
A crew measures your existing boxes, you pick door styles and finishes, new doors get ordered, boxes are prepped and veneered, then new doors and hardware go on. Most of the wait is in the door fabrication step, not the install itself.
What kitchen cabinet colors will look outdated in 2026?
Heavy orange-toned oak stains and high-gloss thermofoil whites are starting to read dated. Matte finishes in warm white, sage, and deep navy are holding steady as safer long-term choices.
What are common issues with a builder grade kitchen?
Thin particleboard boxes, thermofoil edges that lift in humidity, and hardware that loosens fast. The boxes are usually fine structurally. It's the surface and doors that fail first.
What is the most expensive part of redoing a kitchen?
Moving plumbing, electrical, or layout drives the cost up fast in a full remodel. Refacing skips that entirely by keeping the boxes where they are and replacing only the visible surfaces.
How much does Cabinet Refacing cost in Auburndale?
Most full kitchens land between $4,500 and $14,000 depending on size, door style, and material grade. A single vanity or door-only swap runs much less. See the cost section below for tier ranges.
How long does Cabinet Refacing take?
The install itself is usually 2 to 4 days. The longer wait is door fabrication, which typically takes 1 to 2 weeks before the crew ever shows up to install.
Do I need a permit for Cabinet Refacing?
Cosmetic refacing, door swaps, and veneer work typically don't need a permit. Changing the kitchen layout or moving plumbing and electrical usually does. Check with Polk County or your city building department to confirm.
Is DIY Cabinet Refacing a good idea?
Swapping hardware or doing a touch-up is fine to DIY. Veneer adhesion and box prep are harder to get right, especially with Florida humidity working against a weak bond. A patchy seal shows up as peeling within a year or two.
Ready for a clear estimate?
Tell us about the project, or call to talk through options in Auburndale.